Please select a wishlist
Hydraulic scissors lifting table with tandem scissors

Hydraulic scissors lifting table with tandem scissors

Lifting table HTS 1500

Lifting table HTS 1500

Lifting table with dumping platform H 15-11

1500
1350
1100
700
€0.00
Price on Request
Price and delivery time on request
Item number 1169986
Modell
H 15-11
Platform length (mm)
1350
Platform width (mm)
1100
Effective stroke (mm)
700
Height (mm)
220
delivery time
Price and delivery time on request
Aggregate set-up
extern
Engine power (kw)
2
Lifting time (sec.)
25
Lifting table with dumping platform H 15-11
Application:

• Robust design to withstand large loads
• No deformation on the platform caused by applied forces
• Plain bearing for long service life
• Use of high-quality plunger cylinders
• Solid floating bearing rollers

Technical specifications:

Payload: 1500 kg
Lifting range: 220 mm - 920 mm measured without tilting platform or 380 mm - 1080 mm incl. tilting platform
Effektive stroke: 700 mm
Lifting time: approx. 25 sec
Lowering time: approx. 25 sec
Design height: 220 mm without tilting platform or 380 mm incl. tilting platform
Platform
- dimensions: 1350 x 1100 mm
- material: 6 mm smooth sheet metal
Hydraulic unit:

• located outside Ex-area, (on 30 m fixed piping, loosely laid)
• red / black lacquered
• on a leak oil pan
• max. duty cycle 10%

Motor:

• 1,5 kW IE1
• Valve: 24 VDC

Hydraulic cylinders:

• plunger cylinder, red lacquered
• piston rod hard chromium plated
• operating voltage: 400 V 3/N/PE 50 Hz
• control voltage: 24 VDC

Control:

• EX- push button UP/DOWN EMERGENCY (dead man)
• on 5 m cable with magnetic adhesion
• Adjustable lifting and lowering limit switches
• IP 54 for inside area
• EX - lift limit switch on C-rail infinitely adjustable
• EX - lowering lift limit switch on C-rail infinitely adjustable
• main switch or EURO connector on the customer side

Safety:

• circumferential foot guard switchboard
• tube breakage protection in the cylinder
• lowering brake valve
• maintenance supports
• pressure relief valve
• the design complies with the applicable EN1570-1 guidelines

Surface: APPLICATION IN THE INTERIOR:

• steel structure blasted with pretreatment according to EN ISO 12944 in combination with ST 3 pretreated parts according to DIN ISO 8501/1.
• coating material 2 K-PUR thick film with high chemical and oil resistance.
• colour RAL 7024 graphite grey

Particularities:

• Lifting table according to customer specifications in Ex-protection II 3G ExIIB T3 Zone 22.
• 2 Strokes / hour in 2-shift operation
• Ex-bellows around under the platform
• Pit installation
• Ring screws for lifting the LT (lifting table) from the pit
• Revision flap in the platform
• Set-up bolts with rubber buffer as end position damping
• Heavy duty dowel included
• INCLUDING tilt platform with plug-in stop, 500 mm high, on one longitudinal side
• (Tipping or lowering up to a maximum of 45° over the longitudinal side is only possible if the lifting table has been moved so far up that the crushing edge no longer poses a risk of crushing)

Without assembly without removal